It fully automates the reproduction work of microplates safely and accurately.
- Full Automation: Tap water→Chemical immersion→Dry
- Each process of tap water, chemical immersion, rinsing of demineralized water, and air blowing can be selected.
- The processing time of each can also be selected.
- It is possible to manage the time while washing. (Elapsed time, remaining time, etc.)
- Sterilization treatment can be done by plate immersion with chlorine/carbon based cleaning.
- No need to worry about rust as it is all stainless steel.
- There is a switching mode that can use the cleaning fluid repeatedly.
- Cleaning fluid is monitored by a pressure monitor to ensure the certainty of rinsing.
- Microplates are available in 120-/96-hole permanent, rigid, and other types.
Components
-
- Microplate Washer itself
- 1 unit
-
- Drying nozzle
- 1 set
-
- Plate supply block
- 4 blocks
-
- Demineralized water tank
- 1 unit
-
- Tap water / Demineralized water nozzle
- 1 set
Option
- Plate supply block (For rigid plate)
- Plate supply block (For permanent plate)
- Cleaning agent, T-3000 (chlorine)
- Cleaning water tank
- Cleaning water tank stand
Product specification
-
- Product Name
- Microplate Washer
-
- Type
- PW-N56
-
- Size
- 1120(H)×1400(W)×750(D)
-
- Power Supply
- 3-phase 200V 30A 50/60Hz
-
- Weight
- Approximately 240 kg
-
- Housing Material
- All stainless steel
-
- Plate Type
- 96/120 hole plate (permanent, rigid)※1
-
- Cleaning number
- 56 pcs (Fixed)
-
- Cleaning Method
- Nozzle / Jet system
-
- Cleaning Process
- Six process selection: Tap water / Blower / Cleaning fluid / Chemical immersion / Rinse demineralized water / Blower (Maximum of 6 processes)
-
- Control panel
- Touch panel
-
- Cleaning Setting
- Process selection and cleaning head reciprocating number program input for each process
-
- Attached tank
- Demineralized water: Approx. 60L, Cleaning fluid: Approx. 100L
-
- Cleaning water amount
- Tap water : Approx. 25L/min, Demineralized water: Approx. 20L/min
-
- Message
- Japanese display
※1：A dedicated plate supply rack is required for rigid plates.
This specification may be changed without prior notice.